|
Product Details:
Contact Now
Chat Now
|
| Material Grade: | Incoloy 825 / UNS N08825 / W.Nr. 2.4858 | Standard: | ASTM B425 / ASME SB425 |
|---|---|---|---|
| Tensile Strength: | ≥ 586 MPa (85 Ksi) | Yield Strength: | ≥ 241 MPa (35 Ksi) |
| Elongation: | ≥ 30 % | Hardness: | ≤ 200 HBW (reference) |
| Density: | 8.14 G/cm³ | Modulus Of Elasticity: | 196 GPa |
| Max Operating Temperature: | ≤ 538°C(1000°F) |
Incoloy 825 (UNS N08825) is a nickel-iron-chromium alloy with additions of molybdenum, copper and titanium, offering excellent corrosion resistance in both oxidizing and reducing environments. It provides outstanding resistance to sulfuric acid, phosphoric acid, pitting, crevice corrosion and chloride-induced stress corrosion cracking. Incoloy 825 Round Bar is widely used in chemical processing, oil and gas, marine engineering, petrochemical plants, heat exchangers, pumps and valves.
Excellent Corrosion Resistance : Performs well in oxidizing and reducing environments.
Acid Resistance : Excellent resistance to sulfuric acid and phosphoric acid.
Pitting and Crevice Corrosion Resistance : Provides reliable protection against localized corrosion.
Stress Corrosion Cracking Resistance : Resists chloride-induced stress corrosion cracking.
Good Mechanical Properties : Offers good strength, toughness and ductility.
Chemical Processing Industry : Reactors, heat exchangers, acid storage tanks and chemical processing equipment.
Oil & Gas Industry : Valves, pumps, wellhead components and corrosion-resistant piping systems.
Petrochemical Industry : Refinery equipment, process vessels and chemical transfer systems.
Marine Engineering : Seawater handling equipment, offshore platforms and marine components.
Pollution Control : Flue gas desulfurization systems, scrubbers and environmental protection equipment.
Product Name: Incoloy 825 Round Bar
Material Designation: UNS N08825, W.Nr.2.4858
Alloy Family: Nickel-Iron-Chromium Corrosion Resistant Alloy
Product Form: Round Bar / Rod
Reference Standard: ASTM B425, ASME SB425
Diameter: Custom sizes available
Length: Random lengths or fixed cut lengths as required
Surface Condition: Hot rolled, peeled, turned, ground bright
Inspection Documents: MTC EN10204 3.1 / 3.2, PMI, UT, Eddy current test on request
Products can be supplied according to agreed specifications, with chemical composition verification, mechanical testing, dimensional inspection, surface examination, PMI, UT and material traceability where required. Material test certificates and additional inspection documentation are available according to the purchase order and applicable product requirements.
Contact our sales team today for a competitive quote, technical datasheet, or to discuss your custom forging requirements.
![]()
Contact Person: Julia Wang
Tel: 0086-13817069731